What is SenseCAP M1 LoRaWAN Indoor?:
SenseCAP M1 is a high-performing, prepared-to-utilize LoRaWAN indoor passage compatible with Helium LongFi Network. However, SenseCAP M1 can associate with The People’s Network inside a couple of simple strides in minutes, and assists you construct LoRa applications with low expenses.
The SenseCAP M1 gives miles of remote Organization inclusion and information transmission limit with regards to LoRa/LoRaWAN gadgets. It helps you join and add to the foundation of The People’s Network while partaking in the advantages of the Helium community.
Features:
- Convenient Setup to Helium Network. 6 stages, 5 minutes, all set.
- Controlled by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband LoRa chip.
- Gotten and Reliable. Underlying ECC608 crypto chip, high-security confirmation, and dependable network.
- Automatic Online Upgrades. Automatic OTA updates, without manual activity.
- Remote Diagnosis. Underlying remote diagnostics mechanism, productive internet-based help.
- 64GB Large Storage. 64GB MicroSD card huge capacity, broadening the lifetime of the passage, realizing the memory requirement of likely update.
- Productive Cooling Solution. Aluminum fenced-in area with a heatsink and cooling fan inside, guaranteeing long haul and stable activity.
- Multiple Accessories. Fiberglass receiving wire, slider cushion for sliding pole establishment, upcoming open-air walled-in area, and so on.
Specifications:
Processor |
Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
RAM |
2GB / 4GB / 8GB |
Storage |
64GB MicroSD Card |
Frequency |
EU868 Version: 863MHz ~ 870MHz / US915 Version: 902MHz ~ 928MHz |
Sensitivity |
-125dBm @125KHz/SF7 |
-139dBm @125KHz/SF12 | |
TX Power |
Up to 26 dBm |
Antenna Gain |
US915: 2.6 dBi
EU868: 2.8 dBi |
Antenna Impedance |
50 Ohm |
Antenna Radiation Pattern |
Omni-Directional |
Wi-Fi |
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless |
Bluetooth |
Bluetooth 5.0, BLE |
LoRaWAN |
Supports Class A, C |
Input Voltage |
DC 5V – 3A |
Interfaces |
USB Type-C (Power Supply) * 1
Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
Operating Temperature |
0°C to 50°C |
Relative Humidity |
0% – 90% (non-condensing) |
Heat Dissipation |
Aluminum enclosure, a heatsink, and a cooling fan |
IP Grade |
IP20 |
Certification |
FCC / CE |
Customer reviews
Reviews
There are no reviews yet.
Write a customer review